Used Boats: 235 Adverts Displaying: 21-30
1928 26'6" x 8' x 3.6' Steel Replica Tugboat
27' tugboat replica
Boat was originally a lifeboat on a Great Lakes ferry, so has hardly ever been in the water.
All supporting and historical documents will be supplied to buyer at time of sale.
Original boat is constructed of 1/4" steel
Original hull is galvanized at waterline
Stern section and wheelhouse were professionally added and are constructed of 1/8" steel plate
Original hull is riveted and was built in Scotland in 1928
NO rust or weak spots and NO leaks.
Dimensions:
26'6" x 8'...
read more
Year: | 1928 |
Length: | 26' 6" |
Location: | Massachusetts USA |
Price: | $19,950 |
View Details |
33' X 10' Workboat With Winch
Cummins motor
Fitted with a winch
Located in Quebec
Price: $13,250 CDN...
read more
Twin Disc MG509 3:1
Price: $20,000 CDN
Good runner
Removed from Volvo Penta MD 100 BK
Belleville, Ontario...
read more
1952 45′ x 13′ Roamer Subchapter M Compliant Model Bow Tug
Price: $225,000 USD
Meet the new workhorse for your fleet! She’s ready to get to work and she’ll get the job done!!
Draft: 5′
Ex USN Portsmouth Lady Submarine Tender
Fresh USCG Subchapter M COI with Great Lakes Route
Powered by 6-71 Detroit, cleanest Detroit around!
Gear is Twin Disc 4.5:1
Topside painted in 2022
Bottom painted in 2021
4 new batteries in 2023
New winches
Safety: all safety gear for USCG new in 2022, fixed fire CO2 system, heat detection and high water alarms
Located in Thousa...
read more
Year: | 2028 |
Length: | 45' |
Location: | New York USA |
Price: | $225,000 |
View Details |
1979 41′ x 14’1 Twin Screw Aluminum UTB/ Workboat/Pilot Boat
Price: $220,000 USD
With fresh coatings and loads of updates, she’s ready to get to work!
Former US Coast Guard vessel
4′ draft
Powered by 2 Cummins 6 cta, 480 hp engines, 500 hours
ZF gears
Electronics: 2 – 12″ Garmins, 2 VHF, radar
New shafts, cutless bearings, couplings, props just reworked
New bottom and hull paint
Comes with lots of spare parts
Location: Mississippi...
read more
Year: | 1979 |
Length: | 41' |
Location: | Mississippi USA |
Price: | $220,000 |
View Details |
New 19′ x 8′ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $25,000 CDN
Fully welded 3/16″ aluminum hull
Rated for 90hp
Self bailing floor/sole drains overboard
Large waterproof storage areas in bow and sides and covered battery storage in transom
Waterproof breaker panel
LED nav lights
Built in fuel tank with gauge
Capacity 5 people
Custom options available
Location: Western Canada
File ref W2394...
read more
Year: | 2020 |
Length: | 19' |
Location: | Manitoba Canada |
Price: | $25,000 |
View Details |
New 15′ x 68″ Aluminum Work/Fishing Tiller Boat
Price: Base model starts at $6,500 CDN
Fully welded 3/16″ aluminum hull
20″ Transom
Capacity 2-4 people
Options available: custom lighting and power for electronics, mounts for fish finders and trolling motors, flat floor/sole, non-skid coatings on sole and stepping surfaces, removable seats or cushions, extended bow deck and storage compartment, other custom options available!
Location: Western Canada
File Ref W2393...
read more
Year: | 2020 |
Length: | 15' |
Location: | Manitoba Canada |
Price: | $6,500 |
View Details |
1945 35′ x 9′ Russel Brothers Alligator Boat – Project Boat
•Price: $15,000 CDN
•Molded depth 4′, Draft 3′, Height 10.5′
•Shell Plating: 1/4″
•Headroom: Wheelhouse – 7′, Cabin 7′, Engine room 6′
•Shaft size: 1 1/2″, 28″ prop
•Cruising speed: est 9 knots
•Cummins engine, hours unknown, 200hp
•Winch is Russel Bros 50hp, 75 rpm, model 93
•Fuel capacity: 200 gallons
•Brass wheel
File T2398
Location: Northwestern Ontario...
read more
Year: | 1945 |
Length: | 35' |
Location: | Ontario Canada |
Price: | $15,000 |
View Details |
2011 26.48m x 11m Multicat Eurocarrier 2611
•Price: Call for Pricing
•Draft 2.8 m (tanks 98% full)
•Deck space 125 metres², Deck load 6 tonne/sq metre
•Class: MCA Cat 1 150 miles from safe haven
•Propulsion: 2 CAT C32, 780 bhp each
•Bow Thruster: 250 hp electric
•Bollard pull: 33 tonne
•Generator: 2 CAT C9 250Kva
•Deck Equipment: 2 cranes – Fwd Hella 25t @ 7 metre, 10.5t @ 16.31 metre; Aft Hella 26t @ 5.67 metre, 10t @ 12.17 metre; Winches – (1) 80 tonne, (1) 50 tonne, (1) 15 tonne tugger
•Fuel capacity: 100 metres&su...
read more
Detroit Diesel 8-92 Marine Genset
Price: $30,000 USD
700 hours
Supercharged and Turbocharged
Demand start
330 kw
480V
3 phase
60 hz
Was a standby generator
Good runner
Has heat exchanger
Location: New York State...
read more